WASP 40100 LDM
Fast, precise, flexible
The 3D printer for clay: The WASP 40100 LDM is designed to print a variety of liquid-tight materials such as clay, earthenware, porcelain and ceramics.
Precise and fast in use with all ceramic materials, this machine is open and accessible from all three sides to allow interaction during the printing process.
The machine is equipped with the LDM WASP Extruder 3.0, a professional ceramic extruder that has a screw system to regulate the material flow. This enables a quick interruption of the material flow and good control of the retraction.
For even greater possibilities, the LDM WASP Extruder XL 3.0, a larger version of the LDM 3.0, is available as an option, allowing you to work with larger nozzles and achieve higher material flow rates of up to 8 mm in diameter.
Get in touch with usPrinter dimensions | 85 x 77 x 195 cm (height 270 cm with tank support) |
Weight of the printer | 84 kg |
Packaging dimensions | 100 x 100 x 230 cm |
Weight including packaging | 211 kg |
Technology | LDM (Liquid Deposition Modeling) |
Print volume | ⌀ 400 mm x 1000 mm (⌀ 400 mm x 450 mm with intermediate plate) |
Nozzle diameter | 1.5 mm / 2 mm / 3 mm (4 mm / 6 mm / 8 mm with LDM XL 3.0) |
Layer resolution | from 0.5 mm to 5 mm |
Maximum print speed | 150 mm/s |
Screw extruder
The equipped WASP LDM 3.0 extruder has a stainless steel screw extrusion that enables printing with retractions.
Huge prints
Up to one meter high
Interface
7-inch TFT touchscreen display and an RGB LED strip with 60 LEDs.
Camera on board
Enables remote monitoring of the printing process and the creation of time-lapse recordings.
3D prints up to 1m high!
Contact us
Our experts will be happy to help you. Get in touch with us!